http://mocmanproductions.com Cars and Bikes Thu, 05 Jan 2012 21:25:30 +0000 hourly 1 http://wordpress.org/?v=3.3.1 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4693 kidstocks Thu, 05 Jan 2012 21:25:30 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4693 Yes, is a good video, but I do recommend using a hand wire brush or a drill with wire brush? bit to clean the hub. Yes, is a good video, but I do recommend using a hand wire brush or a drill with wire brush? bit to clean the hub.

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4692 stever0105 Thu, 05 Jan 2012 20:51:25 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4692 why do you take the cap off the oil reservoir. i changed my brake pads and seem to be softer now .. I didn't take the cap off the reservoir my brakes seem to be soft now i checked my brake line and their fine what do you think ? ? why do you take the cap off the oil reservoir. i changed my brake pads and seem to be softer now .. I didn’t take the cap off the reservoir my brakes seem to be soft now i checked my brake line and their fine what do you think ?
?

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4691 seraphicness Thu, 05 Jan 2012 19:57:21 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4691 thank you for this? video. awesome! thank you for this? video. awesome!

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4690 328iKid Thu, 05 Jan 2012 19:43:36 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4690 There's 4 brake pad wear? sensors on the car right, one for each caliper? There’s 4 brake pad wear? sensors on the car right, one for each caliper?

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4689 silvermediastudio Thu, 05 Jan 2012 19:27:13 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4689 @328iKid Just two on the E46. Driver front and? passenger rear. @328iKid Just two on the E46. Driver front and? passenger rear.

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4688 silvermediastudio Thu, 05 Jan 2012 19:05:24 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4688 @stever0105 Taking the cap off makes it easier/possible? to push the pistons into the caliper body to take off and put back on the rotor. With new pads it'll take about 200 miles to properly bed, during which time you should avoid heavy braking so the rotor and pads properly wear into each other. You may not feel the same "bite" until after the bedding process. Spongy braking may indicate air in the line, which would not result from this procedure as the line was never opened. @stever0105 Taking the cap off makes it easier/possible? to push the pistons into the caliper body to take off and put back on the rotor. With new pads it’ll take about 200 miles to properly bed, during which time you should avoid heavy braking so the rotor and pads properly wear into each other. You may not feel the same “bite” until after the bedding process. Spongy braking may indicate air in the line, which would not result from this procedure as the line was never opened.

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4687 328iKid Thu, 05 Jan 2012 18:54:24 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4687 @silvermediastudio Awesome,? thanks I wasn't sure if I should buy 2 of each. @silvermediastudio Awesome,? thanks I wasn’t sure if I should buy 2 of each.

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4686 silvermediastudio Thu, 05 Jan 2012 18:27:06 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4686 @328iKid No prob. Check out RealOEM for drawings and part numbers, it's invaluable. Then try Pelican Parts, Bavarian, or even Amazon has good prices and free shipping. Also check out e46fanatics, bimmerfest, bimmerforum, and zhpmafia for details, DIYs, etc. Oh, and the Haynes manual can be gotten cheap on Amazon? or eBay. @328iKid No prob. Check out RealOEM for drawings and part numbers, it’s invaluable. Then try Pelican Parts, Bavarian, or even Amazon has good prices and free shipping. Also check out e46fanatics, bimmerfest, bimmerforum, and zhpmafia for details, DIYs, etc. Oh, and the Haynes manual can be gotten cheap on Amazon? or eBay.

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4685 3bn3mar Thu, 05 Jan 2012 17:39:14 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4685 Excellent video series. Thank you for? posting. Excellent video series. Thank you for? posting.

]]> http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html/comment-page-1#comment-4684 mindgames11 Thu, 05 Jan 2012 17:02:35 +0000 http://mocmanproductions.com/bmw-m3-25th-anniversary-part-1-with-e30-e36-models.html#comment-4684 @orlando318 I had a 77 w123 benz and I now have a 2001 e46 3 litre and its a great car, I had to do some intake work to my car? (it's got 120k) and preventative maintenance. decent gas mileage (30 hwy), 225hp, small trunk. @orlando318 I had a 77 w123 benz and I now have a 2001 e46 3 litre and its a great car, I had to do some intake work to my car? (it’s got 120k) and preventative maintenance. decent gas mileage (30 hwy), 225hp, small trunk.

]]>